This course introduces the types of cost estimation from the conceptual design phase through the more detailed design phase of a construction project. In addition, the course highlights the importance of controlling costs and how to monitor project cash flow. Students will work on a break-even analysis of construction tasks in a project.
Ce cours fait partie de la Spécialisation Gestion de la construction
27,299 déjà inscrits
Offert par
Spécialisation Gestion de la constructionUniversité ColumbiaÀ propos de ce cours
71,588 consultations récentes
Résultats de carrière des étudiants
25%
ont commencé une nouvelle carrière après avoir terminé ce cours
29%
ont bénéficié d'un avantage concret dans leur carrières grâce à ce cours
14%
a obtenu une augmentation de salaire ou une promotion
Certificat partageable
Obtenez un Certificat lorsque vous terminez
100 % en ligne
Commencez dès maintenant et apprenez aux horaires qui vous conviennent.
Cours 3 sur 5 dans le
Dates limites flexibles
Réinitialisez les dates limites selon votre disponibilité.
Niveau débutant
Approx. 19 heures pour terminer
Anglais
Sous-titres : Français, Portugais (européen), Russe, Anglais, Espagnol
Compétences que vous acquerrez
Cash FlowCostCost ControlCost Estimate
Résultats de carrière des étudiants
25%
ont commencé une nouvelle carrière après avoir terminé ce cours
29%
ont bénéficié d'un avantage concret dans leur carrières grâce à ce cours
14%
a obtenu une augmentation de salaire ou une promotion
Certificat partageable
Obtenez un Certificat lorsque vous terminez
100 % en ligne
Commencez dès maintenant et apprenez aux horaires qui vous conviennent.
Cours 3 sur 5 dans le
Dates limites flexibles
Réinitialisez les dates limites selon votre disponibilité.
Niveau débutant
Approx. 19 heures pour terminer
Anglais
Sous-titres : Français, Portugais (européen), Russe, Anglais, Espagnol
Offert par
Université Columbia
For more than 250 years, Columbia has been a leader in higher education in the nation and around the world. At the core of our wide range of academic inquiry is the commitment to attract and engage the best minds in pursuit of greater human understanding, pioneering new discoveries and service to society.
Programme du cours : ce que vous apprendrez dans ce cours
21 minutes pour terminer
Construction Cost Estimating and Cost Control Overview
Professor Odeh describes the course and provides an overview of what will be covered. Also covered is an introduction to Construction Cost Estimating and Cost Controls.
21 minutes pour terminer
1 vidéo (Total 11 min)
1 heure pour terminer
Understanding Design in the Construction Industry
Ian Taylor, project manager for Turner and Townsend, introduces the stages of design in a construction project.
1 heure pour terminer
1 vidéo (Total 12 min)
1 heure pour terminer
Introduction to the Types of Cost Estimates
Professor Odeh describes the types of cost estimates in a construction project. Also covered in this module are the tools and methods used to create estimates.
1 heure pour terminer
3 vidéos (Total 30 min)
3 heures pour terminer
Quantity Take-Off and Measurement
James Sneath, Associate Director of Cost Management for Turner and Townsend, and Ian Taylor, Project Manager for Turner and Townsend, discuss Quantity Take Off and Measurement. Estimating cut and fill costs is taught along with a detailed example of using cut and fill software. Also covered in this module is the topic of deep foundations, concrete foundations and structural steel, measurement, masonry, glass curtain wall, facade and wall finishes.
3 heures pour terminer
14 vidéos (Total 116 min)
1 heure pour terminer
Pricing
James Sneath, Associate Director of Cost Management for Turner and Townsend, discusses pricing, labor costs and equipment costs. Topics include, cost materials, formwork, reinforcing steel and concrete. Money component and productivity component is discussed in labor costs, as well as estimating equipment costs.
1 heure pour terminer
5 vidéos (Total 58 min)
1 heure pour terminer
Building the Estimate
James Sneath, Associate Director of Cost Management at Turner and Townsend, Inc., illustrates how to build an estimate. Sneath does a deep dive into a schematic design project.
1 heure pour terminer
6 vidéos (Total 53 min)
1 heure pour terminer
Procurement
1 heure pour terminer
2 vidéos (Total 20 min)
1 heure pour terminer
Post Contract and Cost Estimation within a Project
James Sneath, Associate Director of Cost Management for Turner and Townsend Construction, discusses post contract and cost estimation with a construction project. Also covered in this module are cost reporting, change orders and communication and meetings.
1 heure pour terminer
3 vidéos (Total 35 min)
1 heure pour terminer
Construction Cost Control Methods
Professor Odeh introduces construction cost control and the work segments contained in a project.
1 heure pour terminer
2 vidéos (Total 20 min)
2 heures pour terminer
Earned Value Method (EVM)
In this module, Professor Odeh goes deeper into the Earned Value Method of Cost Control.
2 heures pour terminer
5 vidéos (Total 57 min)
1 heure pour terminer
Close Out Period
Ian Taylor, Project Manager at Turner and Townsend, Inc., introduces cost management close out and punch-list review.
1 heure pour terminer
2 vidéos (Total 19 min)
1 heure pour terminer
Cost Estimation in Practice
James Sneath, Associate Director of Cost Management at Turner and Townsend, Inc., talks about cost estimation in general practice. The unit starts with tips in cost estimating and cost management and ends with a discussion of the international roles of cost managers.
1 heure pour terminer
3 vidéos (Total 26 min)
2 heures pour terminer
Project Cash Flow
Ben Miller, Project Manager at Gilbane Building Company, discusses contracts and cash flows. Revenues, expenses and how they impact projects as a whole will be covered.
2 heures pour terminer
12 vidéos (Total 107 min)
1 heure pour terminer
Technology Trends in Cost Estimating and Cost Control
Kevin Labrecque, Senior Vice President at Harper Limbach LLC discusses technology trends in cost estimating and cost control. Topics include 5D Estimating Systems (BIM), estimating software, technology workflows, and implementation.
1 heure pour terminer
5 vidéos (Total 65 min)
Avis
Meilleurs avis pour CONSTRUCTION COST ESTIMATING AND COST CONTROL
par JB21 mai 2017
Good course, and I agree with a lot of the points. Being active in the industry I was hoping to walk away with new techniques and skill sets. I feel the class was more of a refresher of what we do.
par EJ19 mars 2020
Excellent course but need to improve the videos about building an estimate or make available downloadable content because it is difficult to watch the things that are explained on those videos.
par AS15 déc. 2017
I thoroughly enjoyed the detailed explanations provided by Professor Odeh and the professionals from Turner & Townsend. My most favourite part was the lectures of Sam Spata and Ben Miller.
par VG31 janv. 2019
Very interesting course with substantial and important information and knowledge to get you familiar with cost estimating and cost control. Very practical and close to reality examples.
À propos du Spécialisation Gestion de la construction
The Construction Management specialization is curated for professionals in the construction and civil engineering industry looking to advance their careers. Through this specialization, students will gain comprehensive industry knowledge along with the latest trends and development within the industry. This 5-course specialization will cover the major facets of construction management including project initiation and planning, scheduling techniques and procedures, cost estimating and control, and construction project financials. After students complete this specialization, they will have gained significant skills and tools to stay relevant and ahead of the curve in the world of construction management.
Foire Aux Questions
Quand aurai-je accès aux vidéos de cours et aux devoirs ?
À quoi ai-je droit si je m'abonne à cette Spécialisation ?
Is financial aid available?
D'autres questions ? Visitez le Centre d'Aide pour les Etudiants.
