This course is for you if you are looking to dive deeper into Six Sigma or strengthen and expand your knowledge of the basic components of green belt level of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes and performance. This course will take you deeper into the principles and tools associated with the "Improve" and "Control" phases of the DMAIC structure of Six Sigma.
Ce cours fait partie de la Spécialisation Ceinture verte Six Sigma
Offert par
Spécialisation Ceinture verte Six SigmaUniversity System of GeorgiaÀ propos de ce cours
39,042 consultations récentes
Résultats de carrière des étudiants
14%
ont bénéficié d'un avantage concret dans leur carrières grâce à ce cours
17%
a obtenu une augmentation de salaire ou une promotion
Certificat partageable
Obtenez un Certificat lorsque vous terminez
100 % en ligne
Commencez dès maintenant et apprenez aux horaires qui vous conviennent.
Cours 4 sur 4 dans le
Dates limites flexibles
Réinitialisez les dates limites selon votre disponibilité.
Niveau intermédiaire
Approx. 10 heures pour terminer
Anglais
Sous-titres : Arabe, Français, Portugais (européen), Chinois (simplifié), Italien, Vietnamien, Coréen, Allemand, Russe, Turc, Anglais, Espagnol, Roumain
Résultats de carrière des étudiants
14%
ont bénéficié d'un avantage concret dans leur carrières grâce à ce cours
17%
a obtenu une augmentation de salaire ou une promotion
Certificat partageable
Obtenez un Certificat lorsque vous terminez
100 % en ligne
Commencez dès maintenant et apprenez aux horaires qui vous conviennent.
Cours 4 sur 4 dans le
Dates limites flexibles
Réinitialisez les dates limites selon votre disponibilité.
Niveau intermédiaire
Approx. 10 heures pour terminer
Anglais
Sous-titres : Arabe, Français, Portugais (européen), Chinois (simplifié), Italien, Vietnamien, Coréen, Allemand, Russe, Turc, Anglais, Espagnol, Roumain
Offert par
University System of Georgia
The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System.
Programme du cours : ce que vous apprendrez dans ce cours
3 heures pour terminer
Root Cause Analysis
In this module, Dr. Bill Bailey will cover root cause analysis, which includes the 7-step model, counter measure, and "single-minute exchange of die" (SMED). This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous belt material. This refresher area does not serve as a "replacement" for taking the material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.
3 heures pour terminer
12 vidéos (Total 51 min), 5 lectures, 2 quiz
12 vidéos
Purpose of Lean5 min
Cause and Effect Diagrams1 min
5 Whys4 min
FMEA - pt15 min
FMEA - pt25 min
FMEA - pt36 min
Introduction1 min
7-Step Model4 min
More Tools for Root Cause4 min
Counter Measures4 min
Single-minute Exchange of Die (SMED)5 min
5 lectures
Highly-Recommended Text10 min
Introduction - Recommended Reading10 min
7-Step Model - Recommended Reading10 min
Counter Measures - Recommended Reading10 min
SMED - Recommended Reading10 min
2 exercices pour s'entraîner
Root Cause Analysis Practice Quiz30 min
Root Cause Analysis Graded Quiz30 min
3 heures pour terminer
Lean Tools
In this module, Dr. Bill Bailey will cover a more advance use of lean tools, including a look at the lean philosophy, lean goals, and lean systems. You will also be exposed to three important case studies. This module also begins with a Yellow Belt Refresher Area, since some learners may have entered this course without having taken the previous yellow belt material. This refresher area does not serve as a "replacement" for taking the yellow belt material. It is only a "patch" for those who already have some knowledge of six sigma, but find the yellow belt specialization to be too introductory for their current situation. If you find yourself struggling with the green belt material in this course, it is highly recommended that you travel through the yellow belt specialization before attempting the green belt content.
3 heures pour terminer
17 vidéos (Total 79 min)
17 vidéos
Poka Yoke3 min
Removing Waste5 min
Kaizan4 min
Kan Ban8 min
5S4 min
Process Mapping - vid16 min
Process Mapping - vid23 min
Value Stream Mapping4 min
Total Productive Maintenance, Visual Management, & SMED4 min
Introduction1 min
Lean Philosophy5 min
Lean Goals4 min
Lean Tools & Systems5 min
Case Study 14 min
Case Study 23 min
Case Study 36 min
2 exercices pour s'entraîner
Lean Tools Practice Quiz30 min
Lean Tools Graded Quiz30 min
2 heures pour terminer
Statistical Process Control (SPC) & Control Plan
In this module, Dr. David Cook will cover statistical process control (SPC) and control plan.
2 heures pour terminer
5 vidéos (Total 23 min), 2 lectures, 2 quiz
5 vidéos
Statistical Process Control - Part 23 min
Statistical Process Control - Part 32 min
Statistical Process Control - Part 45 min
Control Plan6 min
2 lectures
Statistical Process Control - Recommended Reading10 min
Control Plan Recommended Reading10 min
2 exercices pour s'entraîner
SPC and Control Plan Practice Quiz30 min
SPC and Control Plan Graded Quiz30 min
1 heure pour terminer
Lean Tools for Process Control
In this module, Dr. David Cook will cover lean tools for process control.
1 heure pour terminer
2 vidéos (Total 7 min), 1 lecture, 2 quiz
1 lecture
Lean Tools and Process Control - Recommended Reading10 min
2 exercices pour s'entraîner
Lean Tools for Process Control Practice Quiz30 min
Lean Tools for Process Control Graded Quiz30 min
Avis
Meilleurs avis pour SIX SIGMA ADVANCED IMPROVE AND CONTROL PHASES
par RK11 déc. 2017
The specialization gives a very good idea about lean sigma . however, it would ave been It would have been interesting if a section about service quality applications was added in each of the courses.
par KM12 déc. 2020
Great course to learn about six sigma Green belt from entrance level to expertise level. I highly recommend this course. Thank you all for the immense support throughout the course.
par RM11 août 2020
Nicely explained all the concepts in course, Final Six Sigma Green Belt project is very challenging. Well designed course. Learned lot of new concepts in project work.
par SA1 juin 2020
This is a very well designed course which will help you learn about the six sigma's concept. It is a must if you are to gain knowledge on how industries are managed.
À propos du Spécialisation Ceinture verte Six Sigma
This specialization is for you if you are looking to learn more about the more advanced components of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes, performance, and quality assurance.
Foire Aux Questions
Quand aurai-je accès aux vidéos de cours et aux devoirs ?
À quoi ai-je droit si je m'abonne à cette Spécialisation ?
Is financial aid available?
D'autres questions ? Visitez le Centre d'Aide pour les Etudiants.
