This course will cover the Measure phase and portions of the Analyze phase of the Six Sigma DMAIC (Define, Measure, Analyze, Improve, and Control) process. You will learn about lean tools for process analysis, failure mode and effects analysis (FMEA), measurement system analysis (MSA) and gauge repeatability and reproducibility (GR&R), and you will be introduced to basic statistics. This course will outline useful measure and analysis phase tools and will give you an overview of statistics as they are related to the Six Sigma process.
Ce cours fait partie de la Spécialisation Six Sigma Yellow Belt
Six Sigma Tools for Analyze
Offert par
À propos de ce cours
23,752 consultations récentes
Résultats de carrière des étudiants
33%
ont commencé une nouvelle carrière après avoir terminé ce cours
36%
ont bénéficié d'un avantage concret dans leur carrières grâce à ce cours
11%
a obtenu une augmentation de salaire ou une promotion
Compétences que vous acquerrez
StatisticsBinomial DistributionData AnalysisCausality
Résultats de carrière des étudiants
33%
ont commencé une nouvelle carrière après avoir terminé ce cours
36%
ont bénéficié d'un avantage concret dans leur carrières grâce à ce cours
11%
a obtenu une augmentation de salaire ou une promotion
100 % en ligne
Commencez dès maintenant et apprenez aux horaires qui vous conviennent.
Cours 3 sur 4 dans le
Dates limites flexibles
Réinitialisez les dates limites selon votre disponibilité.
Niveau débutant
Approx. 6 heures pour terminer
Recommandé : 12 hours/week
Anglais
Sous-titres : Anglais
Programme du cours : ce que vous apprendrez dans ce cours
1 heure pour terminer
Measurement System Analysis
Welcome to Six Sigma Tools for Analyze! This is the third course in the Six Sigma Yellow Belt Specialization. Your team of instructors, Dr. Bill Bailey, Dr. David Cook, Dr. Christine Scherrer, and Dr. Gregory Wiles, currently work in the College of Engineering and Engineering Technology at Kennesaw State University. This module will introduce you to Measurement System Analysis (MSA) which is a key component of the Measure phase of the DMAIC process. You will also learn about Gauge Repeatability & Reproducibility (GR&R) and why it is used in the measurement phase.
1 heure pour terminer
2 vidéos (Total 10 min), 3 lectures, 2 quiz
3 lectures
Highly-Recommended Text1 min
Measurement System Analysis - Recommended Reading3 min
Gage Repeatability & Reproducibility - Recommended Reading10 min
2 exercices pour s'entraîner
Measurement System Analysis Practice20 min
Measurement System Analysis Practice Graded Quiz16 min
2 heures pour terminer
Process Analysis Tools
This module will introduce you to the Analysis phase of the DMAIC process. Process analysis helps you to better understand current processes and how they can be improved. You will be introduced to many of the different process analysis tools that are commonly used by Six Sigma experts. Failure Mode and Effects Analysis (FMEA) will also be introduced to help you better understand how to identify process failures.
2 heures pour terminer
6 vidéos (Total 29 min), 4 lectures, 2 quiz
6 vidéos
Eliminating Waste4 min
5S4 min
FMEA Part 15 min
FMEA Part 25 min
FMEA Part 36 min
4 lectures
Eliminating Waste and 5S - Recommended Reading10 min
FMEA Pt. 1 - Recommended Reading5 min
FMEA Pt. 2 - Recommended Reading10 min
FMEA Gift - Recommended Reading20 min
2 exercices pour s'entraîner
Process Analysis Tools Practice20 min
Process Analysis Tools8 min
1 heure pour terminer
Root Cause Analysis
Root cause analysis is a common problem solving step. Determining the root cause of something is an important aspect of uncovering the causes of a problem. In this module you will review the different tools used in determining root cause including 5-whys, process mapping, force-field analysis, and matrix charts.
1 heure pour terminer
5 vidéos (Total 21 min), 4 lectures, 2 quiz
5 vidéos
Root Cause Analysis1 min
5 Whys4 min
Process Mapping3 min
Force Field Analysis4 min
Matrix Charts7 min
4 lectures
5 Whys - Recommended Reading5 min
Process Mapping - Recommended Reading15 min
Force Field Analysis - Recommended Reading2 min
Matrix Charts - Recommended Reading5 min
2 exercices pour s'entraîner
Root Cause Analysis Practice20 min
Root Cause Analysis Graded Quiz10 min
2 heures pour terminer
Data Analysis
In this module you will be diving into the statistical side of Six Sigma. You will begin with learning about the basic distribution types which include normal and binomial. You will then proceed to variation and will learn the difference between common and special cause variation.
2 heures pour terminer
7 vidéos (Total 23 min), 4 lectures, 2 quiz
7 vidéos
Calculating Probabilities Using the Normal Distribution4 min
Calculating Probabilities in the Normal Distribution: Example Problems3 min
The Binomial Distribution2 min
Binomial Distribution Calculations3 min
Binomial Distribution Calculations: More Examples3 min
Common Versus Special Cause Variation2 min
4 lectures
Characteristics of Probability Distributions - Recommended Reading20 min
The Normal Distribution Table10 min
The Binomial Distribution - Recommended Reading10 min
Common Versus Special Cause Variation - Recommended Reading15 min
2 exercices pour s'entraîner
Data Analysis Practice Quiz40 min
Data Analysis Graded Quiz30 min
Avis
4.7
Meilleurs avis pour SIX SIGMA TOOLS FOR ANALYZE
par KCOct 4, 2019
Got to learn new more things. As a suggestion, project work or peer-graded assignments can be included for more practice and understanding of charts and distributions.
par ETOct 15, 2018
I enjoy the clear presentations of the lecturers. The lecture slides are extremely helpful. The lectures compliment very well the ideas mentioned in the textbook.
par SSOct 11, 2019
I am always afraid of the normal distribution. But in the professor's way in this course made me easily understand about it.
par ZDOct 15, 2018
I like the course but I would like to do more peer graded assignments in order to use new things I have learned
par ELApr 26, 2018
Easy to comprehend. It provides a gist of the handbook without omitting essential information.
par NGJan 18, 2020
Week 4 professor lecture very fast and very difficult to understand basis knowledge person
par TSOct 29, 2017
It teaches real, practical tools. The material is well explained and engaging.
par JFeb 23, 2019
THANK YOU ALL FOR SIMPLIFYING THE COURSE AND GOOD TEACHING METHODOLOGIES
par SPAug 6, 2019
The course was really helpful and it helped me gain a lot of knowledge
par AMNov 5, 2018
It's one of the interesting courses in the six sigma specialization.
par MSFeb 4, 2020
good course but reading material should be available on this site
par RSJun 9, 2018
awesome exercise and content ,felt some lack of numeric problems
À propos de University System of Georgia
The University System of Georgia is composed of 28 higher education institutions including 4 research universities, 2 regional universities, 12 state universities, 13 state colleges and the Skidaway Institute of Oceanography. The Georgia Public Library System, encompassing 61 library systems throughout Georgia, is also part of the University System.
À propos du Spécialisation Six Sigma Yellow Belt
This specialization is for you if you are looking to learn more about Six Sigma or refresh your knowledge of the basic components of Six Sigma and Lean. Six Sigma skills are widely sought by employers both nationally and internationally. These skills have been proven to help improve business processes, performance, and quality assurance.
In this specialization, you will learn proven principles and tools specific to six sigma and lean.
This is a sequential, linear designed specialization that covers the introductory level content (at the "yellow belt" level) of Six Sigma and Lean. Yellow Belt knowledge is needed before advancing to Green Belt (which is a second specialization offered here on Coursera by the USG). Green Belt knowledge is needed before moving to a Black Belt.
The proper sequence of this specialization is:
Course #1 - Six Sigma Fundamentals
Course #2 - Six Sigma Tools for Define and Measure
Course #3 - Six Sigma Tools for Analyze
Course #4 - Six Sigma Tools for Improve and Control
At the end of Course #4 (Six Sigma Tools for Improve and Control), there is a peer-reviewed, capstone project. Successful completion of this project is necessary for full completion of this specialization.
It should be noted that completing either the Yellow Belt or Green Belt Specializations does not give the learner "professional accreditation" in Six Sigma. However, successful completion will assist in better preparation for such professional accreditation testing.
Foire Aux Questions
Quand aurai-je accès aux vidéos de cours et aux devoirs ?
Une fois que vous êtes inscrit(e) pour un Certificat, vous pouvez accéder à toutes les vidéos de cours, et à tous les quiz et exercices de programmation (le cas échéant). Vous pouvez soumettre des devoirs à examiner par vos pairs et en examiner vous-même uniquement après le début de votre session. Si vous préférez explorer le cours sans l'acheter, vous ne serez peut-être pas en mesure d'accéder à certains devoirs.
À quoi ai-je droit si je m'abonne à cette Spécialisation ?
Lorsque vous vous inscrivez au cours, vous bénéficiez d'un accès à tous les cours de la Spécialisation, et vous obtenez un Certificat lorsque vous avez réussi. Votre Certificat électronique est alors ajouté à votre page Accomplissements. À partir de cette page, vous pouvez imprimer votre Certificat ou l'ajouter à votre profil LinkedIn. Si vous souhaitez seulement lire et visualiser le contenu du cours, vous pouvez accéder gratuitement au cours en tant qu'auditeur libre.
Quelle est la politique de remboursement ?
Une aide financière est-elle possible ?
What do I need to successfully complete this course?
Our applied curriculum is built around the latest handbook The Certified Six Sigma Handbook (2nd edition) and students will develop /learn the fundamentals of Six Sigma. Registration includes online access to all course content, projects, and resources. This price does not include the companion text The Certified Six Sigma Handbook (2nd edition).
D'autres questions ? Visitez le Centre d'Aide pour les Etudiants.