Chevron Left
Retour à Sensors and Sensor Circuit Design

Avis et commentaires pour d'étudiants pour Sensors and Sensor Circuit Design par Université du Colorado à Boulder

4.6
étoiles
976 évaluations

À propos du cours

This course can also be taken for academic credit as ECEA 5340, part of CU Boulder’s Master of Science in Electrical Engineering degree. After taking this course, you will be able to: ● Understand how to specify the proper thermal, flow, or rotary sensor for taking real-time process data. ● Implement thermal sensors into an embedded system in both hardware and software. ● Add the sensor and sensor interface into a microprocessor based development kit. ● Create hardware and firmware to process sensor signals and feed data to a microprocessor for further evaluation. ● Study sensor signal noise and apply proper hardware techniques to reduce it to acceptable levels. You will need to buy the following components to do the two course projects based on the videos in this module. Note that if you have already purchased the PSOC 5LP PROTOTYPING KIT, you do not need to buy it again. These parts may be purchased off the Digikey web site, www. Digikey.com. Or, you may obtain the specs from the site, and purchase them elsewhere. These are the part numbers typed out, so you can copy and paste them into the Digikey web site. You will need one of each part. 428-3390-ND NHD-0216BZ-RN-YBW-ND 570-1229-ND A105970CT-ND Additional equipment needed: • Wire - various gauges and lengths • Breadboard • Oscilloscope – suggested models are: o PICOSCOPE 2204A-D2 available on www.digikey.com or o Digilent 410-324 | OpenScope MZ available on www.newark.com Depending on your budget, you can also investigate these models: o Hantek HT6022BE20MHz - https://www.amazon.com/dp/B009H4AYII o SainSmart DSO212 - https://www.amazon.com/dp/B074QBQNB7 o PoScope Mega50 USB - https://www.robotshop.com/en/poscope-mega50-usb-mso-oscilloscope.html o ADALM2000 - https://www.digikey.com/en/products/detail/analog-devices-inc./ADALM2000/7019661...

Meilleurs avis

CM

28 mai 2020

This course is really tailormade and covers many aspect of sensor and sensor circuit design in minute details. The assignments and course project ensure the students engagement and learning.

NC

16 sept. 2020

It was amazing experience about how the course was so professionally held .It was amazing i have learning different things right from practical to theory it absolutely brilliant.

Filtrer par :

1 - 25 sur 228 Avis pour Sensors and Sensor Circuit Design

par paradigminversion

30 nov. 2021

par Junghee K

27 août 2019

par Kadiri C

26 janv. 2019

par Thomas H

16 févr. 2019

par Carlos N G

2 juil. 2019

par Rebecca G

13 mai 2019

par Md H

6 mars 2019

par Sylvain G

19 avr. 2020

par Jesper B C

10 juin 2020

par Bharti r k

17 mai 2020

par Chandrashekhar M M

28 mai 2020

par tanmay n

30 mars 2020

par Manuel C

21 févr. 2019

par Shane m

4 avr. 2019

par Aakriti B

19 mars 2019

par Richard J

12 févr. 2020

par J A P

7 déc. 2019

par Enrique V

25 avr. 2020

par RAFIH P

14 juin 2020

par Ahmed M A F

9 mars 2020

par akshat m

2 nov. 2019

par PALLAVI M

2 sept. 2020

par HASSAN B T

14 juil. 2020

par Nofri W C

17 sept. 2020

par Ryan C

10 févr. 2019