In this Capstone course, you will design a microcontroller-based embedded system. As an option, you can also build and test a system. The focus of your project will be to design the system so that it can be built on a low-cost budget for a real-world application. To complete this project you'll need to use all the skills you've learned in the course (programming microcontrollers, system design, interfacing, etc.). The project will include some core requirements, but leave room for your creativity in how you approach the project. In the end, you will produce a unique final project, suitable for showcasing to future potential employers.
Ce cours fait partie de la Spécialisation Une introduction à la programmation de l'Internet des objets
Offert par


À propos de ce cours
Résultats de carrière des étudiants
40%
38%
Compétences que vous acquerrez
Résultats de carrière des étudiants
40%
38%
Offert par

Université de Californie à Irvine
Since 1965, the University of California, Irvine has combined the strengths of a major research university with the bounty of an incomparable Southern California location. UCI’s unyielding commitment to rigorous academics, cutting-edge research, and leadership and character development makes the campus a driving force for innovation and discovery that serves our local, national and global communities in many ways.
Programme du cours : ce que vous apprendrez dans ce cours
Get Started
This section will answer questions you might have about the project assignment, the grading rubric, and what you can expect in the upcoming weeks together.
Capstone Design, Part 1
This module will assist you in selecting an idea for your Capstone project. There are many variables to consider in this decision so it's important to know the parameters and how they impact your choice. Your decision will then drive the content of the very first step in your Capstone project -- preparing a requirements specification.
Capstone Design, Part 2
With the requirements specification out of the way, it's time to turn your attention to the system-level design of your project. This module will walk you through the constraints your project will need to satisfy. You'll also be informed about how to consider alternatives to your design.
Capstone Design, Part 3
Naturally testing is a key component of any technical design. This module will walk you through the important aspects of a test plan for your design.
Capstone Design, Part 4 (OPTIONAL)
In this final module, you will have the option of actually building out and then demonstrating your final project. This module is optional because it requires you to have the necessary equipment.
Specialization Wrap-Up
Let's wrap up our time together as we have traveled through the specialization.
Avis
Meilleurs avis pour PROGRAMMING FOR THE INTERNET OF THINGS PROJECT
Great course. It forced me to sit down and design something. Unfortunately, the week 4 optional submission is not editable. I left something out of the short pdf document. I hope it's ok :)
A very interesting course. Students get the freedom to choose their own ideas and are allowed to implement it. Learnt how to approach a project logically and systematically.
One of the easiest and informative course which makes you believe on your potential and still teaches you sufficient to lean and gain confidence in subject matter
the final project was a very good opportunity to apply all of the concepts we did in previous course. we did a good practice with it.
À propos du Spécialisation Une introduction à la programmation de l'Internet des objets
Design, create, and deploy a fun IoT device using Arduino and Raspberry Pi platforms.

Foire Aux Questions
Quand aurai-je accès aux vidéos de cours et aux devoirs ?
À quoi ai-je droit si je m'abonne à cette Spécialisation ?
Is financial aid available?
Puis-je obtenir des crédits universitaires si je réussis le Cours ?
D'autres questions ? Visitez le Centre d'Aide pour les Etudiants.